Blending/Mixing; Cleaning And Maintenance; Safety Information - CASO DESIGN CB 2200 Mode D'emploi

4. After selected the cooking temperature and cooking time, then Start/Stop key to start
the process.
► During the cooking process, you can stir at any time by pressing
panel.
5. Once the cooking time has ended the appliance will sound an alert(5beeps), then it will
automatically switch to keep warm mode, which will keep your soup at low temperature
for 20 minutes.
6. After 20 minutes of keep warm function, the appliance will sound an alert(5beeps) and
then it will automatically goes into standby mode.
15.4.3

Blending/Mixing

1. To blend the ingredients according to your preference, press the key
control panel, by default the Medium(2) speed will be selected.
+
2. Press key to adjust the speed of blending function. In this blend mode, can select
three different speeds such as LOW(1), MEDIUM(2), HIGH(3) accordingly and no time
duration.
3. Put the ingredients into the glass bowl, cover up with lid and make sure it fits properly.
4. Once selected the blending speed, press key
finger on this key, the blending will continue, If you remove the finger from this key it will
stop.
5. The blending speed and time will make the texture of the preparation.
► For safety reasons, the blending function in manual operation will stop automatically
after few seconds.

16 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.

16.1 Safety information

Attention
Please observe the safety instructions, before cleaning your device
► Never immerse the base, glass bowl, power cord or mains plug into water.
► Do not clean glass bowls, interface and base housing with abrasive side of a sponge or
pad. Only use soft cloth to clean.
Caso Mixer mit Kochfunktion CB 2200
Please note
Please note
key on control
to start blending. If you keep the
(P7) on
47