sunjoe SPX3000 Manuel D'utilisation page 8

8. To assemble the hose holder, slide the holder into position
(Figs. 10 & 11) and secure it to the unit with the remaining
small screw (Fig. 12).
Fig. 10
Fig. 11
Fig. 12
OFF O
9. Fit the spray wand into the trigger gun and rotate the
collar until the two parts are completely locked (Fig. 13).
Fig. 13
10. Connect the high-pressure hose to the trigger gun
(Fig. 14).
Fig. 14
11. Connect the high-pressure hose to the water outlet on the
washer (Fig. 15).
Fig. 15
Small screw
High-pressure
hose
8
Spray wand
Collar
High-pressure hose
(REAR)
High-pressure water outlet
Trigger gun
Trigger gun