Changing The Piston - Sherco ST Serie Manuel D'atelier

- Loosen and remove the radiator cap.
- Loosen and remove the cooling circuit
draining screw.
- Have a receptacle ready to collect the
fl uid.
- Empty the cooling fl uid from the
- engine.
Replace and close the draining screw.
- Open the cover and remove the air
fi lter.
-
Loosen and remove the fi lter box's
fastening screws as well as those of
the rear mudguard.
-
Loosen the rear mudguard.
Remove the CDI
162

CHANGING THE PISTON

ST SERIES