Clutch Discs - Sherco ST Serie Manuel D'atelier

- First remove the brake pedal. Loosen
and remove the clutch cover screws.
- Loosen the clutch spring screws.
- Remove the spring-bearing plate. - Pay
attention to the position of the washer.
- Using a calliper gauge, check the wear
and tear of the disc lining, max 2.6mm,
min 2.4mm.
- Pay attention to how the discs are placed
when reassembling and tightening the
disc assembly.
❱❘
PARTS BREAKDOWN

CLUTCH DISCS

171