Display Items; Repeat And Shuffle Play; Radio; Storing And Receiving Stations - Sony CDX-GT414U Mode D'emploi

CD
For details on selecting a CD/MD changer, see
page 13.

Display items

A AAC/WMA/ATRAC/MP3 indication
B Source
C Track number/Elapsed playing time, Disc/
artist name, Album/group number*, Album/
group name, Track name, Text information,
Clock
* Album/group number is displayed only when the
album is changed.
To change display items C, press (DSPL);
scroll display items C, press (SCRL) on the
card remote commander or set "A.SCRL-ON"
(page 12).
Tip
Displayed items will differ, depending on the disc type,
recorded format and settings. For details on MP3/
WMA/AAC, see page 15; ATRAC CD, see page 15.

Repeat and shuffle play

1
During playback, press (3) (REP) or
(4) (SHUF) repeatedly until the
desired setting appears.
Select
TRACK
ALBUM* 1
GROUP* 2
SHUF ALBUM* 1
SHUF GROUP* 2
SHUF DISC
*1 When an MP3/WMA/AAC is played.
*2 When an ATRAC CD is played.
To return to normal play mode, select "
or "SHUF OFF."
8
To play
track repeatedly.
album repeatedly.
group repeatedly.
album in random order.
group in random order.
disc in random order.
OFF"

Radio

Storing and receiving stations

Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
1
Press (SOURCE) repeatedly until
"TUNER" appears.
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3, MW or LW.
2
Press and hold the select button.
The setup display appears.
3
Press the select button repeatedly
until "BTM" appears.
4
Press (SEEK) +.
The unit stores stations in order of frequency
on the number buttons.
A beep sounds when the setting is stored.

Storing manually

1
While receiving the station that you
want to store, press and hold a
number button ((1) to (6)) until
"MEM" appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be replaced.
Tip
When a RDS station is stored, the AF/TA setting is
also stored (page 9).

Receiving the stored stations

1
Select the band, then press a number
button ((1) to (6)).

Tuning automatically

1
Select the band, then press (SEEK) –/+
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.