Publicité
Les langues disponibles
Les langues disponibles
ECO
SPEED
PLUS 7.4V
6505
High-
SPEED
performance
PLUS 7.4V
6505
You will need the following tools and adhesives to complete the model:
Balsa knife
Screwdriver
Allen key, 1.5 mm A/F
Abrasive paper, 120-grit
Mini fine-nose saw
Side-cutters
Mini flat-nose pliers
Paper scissors
Felt-tip pen, blue
Metric ruler
Cyano-acrylate adhesive ("cyano")
Cyano-acrylate activator
Building instructions
Please read right through these building instructions before you commence
construction, so that you have a clear idea how the aeroplane goes together before
you start work. Make sure you have all the components, tools and adhesives required
for each stage of construction before you start. Some kit components need
preparation before they are fitted; this is always stated in the instructions.
When assembling the model always work on a clean, perfectly flat surface; a sheet of
foam is a good method of avoiding damage to the model surfaces. Unless specifically
stated otherwise, use cyano-acrylate and the associated activator as adhesive
throughout construction. It is best to apply the cyano glue to one surface, then spray
activator on the mating surface before joining the parts. Take particular care to avoid
glue getting onto your hands or on the finished surfaces of the model.
Caution: it is essential to avoid cyano adhesive making contact with your skin,
and with your eyes in particular. We recommend that you wear protective
goggles.
Store adhesives well out of the reach of children.
Do not use Styrofoam cyano-acrylate ("foam cyano") for this model, nor white
glue (wood glue) or epoxy resins. None of these adhesives will produce a
strong bond between the rigid SOLIDPOR foam and other materials.
Please don't attempt to paint the model using Styrofoam spray cans or other
types of paint; these materials will not adhere properly to the rigid SOLIDPOR
foam.
The moulding process produces "flash" - excess material at the mould joints; carefully
remove the unwanted foam from the ready-made SOLIDPOR fuselage.
400
GRAUPNER 6-NiMH-1000
7.2 V / 1.0 Ah
98834.6ST
400
GRAUPNER LiPo 2/1500
7.4 V / 1.5 Ah
7638.2
CAM
FOLDING
PUSHPROP 14 x 10cm
1335.14.10L
CAM
FOLDING
PUSHPROP 14 x 10cm
1335.14.10L
Order No. 980
Order No. 810
Order No. 5735.1,5
Order No. 1068.0
Order No. 982 with
Order No. 861
-----
-----
-----
-----
-----
Order No. 5821
Order No. 953.150
Publicité
