GRAUPNER Elektro-UHU Instructions De Montage page 20

As manufacturers we have no control over the way you build and operate your
RC model aircraft, nor how you install, operate and maintain the associated
components, and for this reason we are obliged to deny all liability for loss,
damage or costs which are incurred due to the incorrect use of our products or
due to incompetent behaviour on the part of the user, or which are connected
with such operation in any way.
Unless otherwise prescribed by binding law, the obligation of the GRAUPNER
company to pay compensation, regardless of the legal argument employed, is
limited to the invoice value of that quantity of GRAUPNER products which was
immediately and directly involved in the event which caused the damage. This
does not apply if GRAUPNER is found to be subject to unlimited liability
according to binding legal regulation on account of deliberate or gross
negligence.
Introduction
The Elektro-UHU is a compact electric-powered RC model aircraft which is capable
of giving hours of flying pleasure to any model flyer. The machine is very highly pre-
fabricated, but please carry out the procedures described in these instructions with
the greatest care, as this will ensure that the model will be safe to fly and have an
excellent performance.
The maximum all-up weight is 650 g, and this must not be exceeded.
RC system
This model should only be flown with an FM radio control system such as the X-306
to mc-24. Please refer to the main Graupner FS catalogue for more information on
RC system components.
You will need the following items to fly the model:
X-306 FM 35* radio control set
* In Germany the 35 MHz band is reserved exclusively for model aircraft.
Recommended servos*
Type Order No.
C 261 5125.LOSE
C 261 5125.LOSE
* Included in the radio control set, Order No. 4708.261.2
Note: Order No. 9400.200 includes the complete X-306 FM RC system, complete
with two C 261 servos.
The following accessories are required to operate the model:
ULTRAMAT 10 battery charger
Dry cells for transmitter (eight required)
Transmitter charge lead
Charge lead with BEC connector
Electric power system and accessories
Power Power set
version Order No.
No. off Function
1 Rudder
1 Elevator
Flight battery
Order No.
Order No. 4708.261.2
Order No. 6410
Order No. 98866
Order No. 3423
Order No. 3037
Pusher propeller
Order No.