Abus FUGB50000 Mode D'emploi page 22

4. Open the housing. The detector now sends a tamper
signal to the alarm centre.
Idle time
The default idle time of the detector is set to one minute.
This function works as follows:
1. The detector recognises a noise and sends a signal to
the centre. The idle time now begins. The LED flashes
once per second in this time.
2. When the idle time has expired, the detector can then
detect the next noise and send a signal to the centre.
Declaration of Conformity
Hereby, ABUS Security-Center GmbH & Co. KG declares
that the radio equipment type FUGB50000 is in compliance
with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following
internet address:
FUGB50000 >> Downloads
The Declaration of Conformity can also be obtained from
the following address:
ABUS Security-Center GmbH & Co. KG
Linker Kreuthweg 5, 86444 Affing, GERMANY
www.abus.com
22
>> Search >>