Dimensions
Weight
HF immunity
Power supply
"Low battery" error
message
Frequency
HF transmission power
Tamper monitoring
Supervision monitoring
Housing material
Subject to alterations and errors.
Position
The detector has a sensor that monitors the entire room
(360°), though it should not directly face the area to be
monitored. It is designed for installation on walls and
ceilings.
Ideally, the detector should be installed on the wall opposite
the window. The ceiling or side walls are also suitable
locations.
80 x 108 x 43 mm (HxWxD)
140 g
10 V/m
3.0 V DC (lithium CR2 battery)
< 2.4 V
868.6625 MHz
10 mW (antenna input)
Yes
Every 4 minutes
ABS
16