Operating The Washer - Kenmore 592-49032 Manuel D'utilisation Et D'entretien

OPERATING THE WASHER

592.4903*
592.4904*
03*
4*
592-49032-02855B-01_EN_v1.indd 12
All manuals and user guides at all-guides.com
1. SORT LAUNDRY AND LOAD WASHER
Refer to page 14.
2. ADD DETERGENT AND OTHER PRODUCTS
Open the dispenser drawer and add
compartment in the dispenser drawer. Add bleach and fabric softener as desired. See pages
15 and 16 for important information on detergents and dispenser use.
3. TURN ON THE WASHER
Press the POWER button to turn ON the washer. The lights around the Cycle Selector Knob
will illuminate and a chime will sound, if turned ON. Refer to page 11.
4. SELECT A CYCLE
Turn the Cycle Selector Knob either direction to select the desired cycle. The preset Wash/
Rinse Temperature, Spin Speed, Soil Level, and Option settings for that cycle will be shown.
Refer to page 11.
5. SELECT CYCLE MODIFIERS
Default settings for the selected cycle can now be changed if desired. This can be done
using the cycle modifier buttons as shown on page 18 (Wash/Rinse, Spin Speed, Soil Level,
and Chime).
NOTE: To protect your fabrics, not all modifiers are available on all cycles.
592.4903*
592.4903*
6. SELECT CYCLE OPTIONS
Cycle options can also be added using the options buttons as shown on page 19-20 (My
Cycle, Control Lock, Delay Start, Clean Washer).
NOTE: Not all options are available on all cycles.
7. BEGIN CYCLE
Press the START/PAUSE button to begin the cycle. Once the cycle has been started,
pressing the START/PAUSE again will pause the washer and retain the existing settings for
up to 4 minutes.
592.4904*
592.4904*
HOW TO USE
HE (High-Efficiency) detergent to the main wash
12
2011-07-22 11:42:14