Güde 4/9-13 Mode D'emploi Original page 9

substances and fragments of abrading
wheels and grinding wheels.
2. The Automatik welding helmet does not
protect against splashing by dangerous and
corrosive liquids.
3. The Automatik welding helmet is not suitable
for oxy-acetylene welding, laser welding or
welding works with a too low number of
amperes.
4. Never weld with the Automatik welding
helmet without being adequately instructed
by qualified staff first.
5. Never open and handle the Automatik
welding helmet electronic cassette. The
manufacturer will not be liable for any
consequential damage or injury.
6. Never leave the place of your work with the
Automatik welding helmet being on as it
could unexpectedly get dark and cause
injury.
7. The Automatik welding helmet must never be
exposed to excess temperatures.
8. Working temperature: -5°C - +55°C
9. Storage temperature: -20°C - +70°C
10. Appropriate protective equipment must
necessarily be worn for welding: safety
shoes, utility gloves, protective glasses and
closefitting clothing.
11. Check the Automatik welding helmet
function every time it is to be used.
Appropriate darkening must especially be
provided for welding.
12. If the Automatik welding helmet or electronic
cassette are damaged, you must not work
with the Automatik welding helmet. Risk of
injury! Any scratched or damaged foils must
be immediately replaced.
13. Mineral filter foils may only be used in
combination with an appropriate underlying
foil.
14. Work under adequate visibility or lighting
only.
15. Follow all safety instructions specified in the
manual.
16. Parts of the Automatik welding helmet that
may come into contact with skin may invoke
an allergic reaction with sensitive persons.
Marking
Product safety:
Product corresponds to
appropriate EU standards
Prohibitions:
Protect against rain and
moisture!
Warning:
Warning/Caution
Commands:
Do not touch these parts to
prevent any burns. Learn to
use the appliance before using
it.
Environment protection:
Dispose waste professionally
so as not to harm the
environment.
Any faulty and/or disposed
electric or electronic devices
must be delivered to
appropriate collection centres.
Package:
- Protect against moisture
- Fragile
- This side up
Technical specifications:
Sight glass size
Lightening level
Lightening and darkening
delay rate
Weight
9
Packing cardboard material
may be delivered to
collecting centres for
recycling.
Interseroh-Recycling
Power supply
Darkening level
Darkening and lightening
delay rate