Function; Setting The Range; Setting Hygiene Flushing - Franke AQUA107 Notice De Montage Et De Mise En Service

12.8 Mount the frame (j) horizontally.
12.9 If necessary, shorten the spacers (k) to fit between the front edge of the recessed
cabinet and the surface of the tiles.
Figure shown simplified without fitting
12.10 Mount the tube (l) to the outlet.
12.11 Open the water volume regulator (see
12.12 Check the water connections for leaks.
12.13 Install the line connections between the electronic module, the solenoid valve unit
(m) and the opto-sensor (n).
A: Solenoid valve
B: Temperature sensor (optional)
C:Opto-sensor
D:Electronic T-junction system lines (Power)
E: Electronic module
☞
Important!
Ensure that the tube is not kinked.
12.14 Hook-in the cover plate (o) on to the top of the tongues in the frame and attach.
12.15 Use the screws (p) to fix the cover plate at the bottom.

13. Function

13.1 Approach the sensor with your body.
• Water flows.
13.2 Move your body away from the sensor.
• Water flow stops automatically.

14. Setting the Range

The signal range can be adjusted with a free program available from Franke.

15. Setting Hygiene Flushing

The signal range can be adjusted with a free program available from Franke.
Instruction Step 12.2).
9