Hyundai HNHP2580SP Instructions Originales page 29

• In order to move the unit easily, bend the lance.
Make sure the unit is turned off and unplugged before trans-
porting the unit.
• The connection to the power supply must be made by a
qualified electrician in accordance with IEC60364-1.
It is recommended that the power supply of this machine
includes a residual current device that interrupts
power if the earth leakage exceeds 30 mA for 30 ms or a
device that will homologate the earth circuit.
• Before assembling, dismantling, repairing, transporting,
servicing and storing, please check if the appliance is dis-
connected from the power supply.
• Handle the unit with care, do not drop it.
• Do not use the machine in extreme weather conditions,
when it is very cold. Do not use the machine with ice water.
• Use the tool in a stable and plane location.
• The inlet hose can be connected to the water mains with a
maximum pressure of 10 bars.
• The appliance must not be connected to potable water
supply.
• CAUTION: In order to avoid danger due to untimely reset-
ting of the thermal cut-out, this device must not be powered
by an external switch, such as a timer, or connected to a
circuit that is regularly switched on energized and de-ener-
gized by the electricity supplier.
• When transporting the machine, take note of its weight. Do
not overestimate your efforts and get help if necessary.
• The machine must be transported from one point to anoth-
er and disconnected. Always use the handle to push the
machine.
• Use the handle to lift the machine.
5