Human Touch Perfect Chair PC-420 Mode D'emploi Et D'entretien page 5

Install the body pad
1. Slide the body pad onto the footrest frame, making sure the frame slides into the pockets on the
bottom corners of the pad (Fig.5).
Fig.5
humantouch.com
Footrest frame installed all
the way into the pocket
8
2. Lift up on the body pad to detach the seat hook and loop fasteners, pull it firmly up toward the
seat, then press firmly down on the seat and leg area to secure it
Fig.6
3. Pull up on the backrest pad until the hook-and-loop fastener strip on the back of the pad aligns with
the hook-and-loop fastener strip on the chair canvas, then press the two strips firmly together (Fig.7).
Backrest pad
Fig.7
(Fig.6).
Hook-and-loop-fastener strips aligned
9