Human Touch Perfect Chair PC-420 Mode D'emploi Et D'entretien page 4

3. PC-610: Place the housing into position on the left-hand armrest as shown (Fig.2).
4. PC-610: Make sure the matching shapes are tightly aligned to ensure that the knob is centered
in the housing.
5. While holding the housing firmly in place, place the arm cap into position and press down firmly (Fig.3).
Arm cap
Fig.3
humantouch.com
Recline controller housing
Fig.2
6
6. While pressing down on the armrest cap, secure it using the provided Phillips-head screwdriver
and three screws (Fig.4).
Front
Fig.4
7. Place the cap into position on the right-hand armrest core, then secure it using three screws.
Rear
7