EMKO ESM-3711HN Mode D'emploi page 8

6. Changing and Saving Temperature Set Value
Main Operation Screen
When SET button pressed ''S'' led will
be active and temperature set value will
be displayed.
SET Value Screen
When ENTER button pressed
temperature set value can be saved.
Temperature set value parameter (Default = 10) MODBUS ADDRESS:40001
Temperature set value, can be programmed between minimum temperature set value
maximum temperature set value
6.1 Changing and Saving Cookıng Time (Timer) Parameter Value
Main Operating Screen
When defrost button is pressed,
cooking time is shown and cooking time
led starts to fast blink (5 Hz).
Cooking Time (Timer) Value Screen
Press set button for saving the
cooking time
i
If no operation is performed in defrost time set value changing mode and temperature set
value changing mode for 20 seconds, device turns to main operation screen automatically.
ü
ü
.
ü
ü
SET Value Screen
Temperature set value can
be changed with increment
and decrement buttons.
Main Operation Screen
''S'' will be inactive and goes back to
main operation screen.
Cooking Time (Timer) Value Screen
Change the cooking time with
increment and decrement
buttons.
Main Operating Screen
Cooking time is saved, cooking time led
active led lights off, main operation screen
is shown.
ü
ü
and
ü
ü
8