Information For Electricians; Installation And Electrical Connection - hager WXH20 Serie Mode D'emploi

z

5 Information for electricians

5.1 Installation and electrical connection

Should you have further questions on the
use and commissioning, please contact the
DANGER!
ç
Touching live parts can result in an electric shock.
An electric shock can be lethal.
Disconnect the connecting cables before working on the device and cover all live
parts in the area!
(14)
(11)
(18)
(12)
(11) Cut-out and cable entry for potential-free
contacts (AUX)
(12) Connection socket for water leakage sen-
sor
(13) Casing cover for power control unit
(14) Fastening screws for casing cover
28
(13)
(17)
IN
5 x 2,5 mm
Figure 3: Mounting power control unit
Technical Application Adviser or your Techni-
cal Service Centre.
(14)
(15)
IN
(16)
2
(15) Device screws for flush-mounted/hol-
low-wall box (not included in scope of
delivery)
(16) Cut-out for flush-mounted installation
(17) Cooker supply cable (not included in scope
of delivery)
(18) Connecting terminal for external signal
generator (potential-free contacts, AUX)
OUT