Changing The Display Position Of The Time/Date Display - Sony SVT-L230P Mode D'emploi

Changing the Display Position of
the Time/Date Display
You can change the position of the time/date display
that appears on the monitor screen.
1
Turn on the power of the equipment to be used.
The normal display appears.
1 5 - 0 6 - 9 8 M O N 0 0 0
1 5 : 2 0 : 0 0 7 2
2
Change the display position as follows.
To move the display downwards, press SHIFT $ .
(When the display reaches the bottom of the
screen, the display returns to the top of the screen.)
To move the display rightwards, press SHIFT z .
(When the display reaches the right-hand edge of
the screen, the display returns to the left-hand edge
of the screen.)
1 5 - 0 6 - 9 8 M O N 0 0 0
1 5 : 2 0 : 0 0 7 2
Note
While recording, this function does not work.
Date
Alarm count
Recording/
playback speed
Time
Press SHIFT z .
Press SHIFT $ .
13