Select The Effect That You Wish To Edit; Editing Each Effect; Dyna (Dynamics & Pick Up Modeling); Amp (Amp Modeling) - Korg TONEWORKS PANDORA PX4 Notice D'emploi

1.Select the effect that you wish to edit

Each time you press an √/® buttons, you will
cycle through the effects in the order shown be-
low. When an effect is selected, its icon will blink.

2.Editing each effect

For each effect, you can select the effect type
and set its parameter values.
Effects that are turned "OFF" will automatically
be turned on if you press the ENTER/REC but-
ton or use the L/M buttons to select the effect
type.
For details on the effect types and parameters,
refer to Effect Parameters (p.29). Renaming the
program, infrared transmitter settings, and writ-
ing the program are also performed here.
1) DYNA (Dynamics & Pick up Modeling)
These are dynamics-type effects such as com-
pressor and auto-wah that modify the tone, and
pickup modeling effects.

2) AMP (Amp Modeling)

This models a guitar amp (15 different types).
Amount of distortion*
High range* Low range*
* Operation will be different if SYNTH is
selected as the type.
On,
Parameter
Off value
T ype selection
Volume*
On,
Mid range*
Off
Type selection
23