Warranty - oventrop Regumaq X-30-B Mode D'emploi

8.1 Removal
WARNING
Risk of injury
Stored residual energies, angular components,
points and edges at the outside and inside of
the appliance may cause injuries.
For this reason:
– Before starting work, make sure that there is
enough place.
– Open and hard-edged components are to
be handled with care.
– Please make sure that the working place is
tidy and clean Loose components and tools
lying around are hazardous.
Before starting removal:
• Switch off appliance and secure against restart.
• Separate physically all power supply from the
appliance and discharge stored residual ener-
gies.
• Remove working and auxiliary materials as well
as remaining processing materials and dispose
of environmentally friendly.
8.2 Disposal
If no return or disposal agreement have been made,
dismantled components are to be recycled:
Metals are to be scrapped.
Plastic parts are to be recycled.
Depending on the material they are made of, other
components are to be disposed of accordingly.
ATTENTION
Ecologically harmful if incorrectly disposed
of
Electrical waste, electronic components, lu-
bricants and other auxiliary materials are dan-
gerous waste and must only be disposed of
by specialised companies
The local municipal authority or specialised dis-
posal companies give information on environmen-
tally friendly disposal.

9 Warranty

Oventrops warranty conditions valid at the time of
supply are applicable.
31