Battery Installation - Kenwood KCA-RCDV340 Mode D'emploi

This unit cannot control the function that isn't
included in the car receiver.
Precautions
# CAUTION
• Put the remote control in a place where it will not
move during braking or other operations.
A dangerous situation could result, if the remote
control falls down and gets wedged under the
pedals while driving.
• Risk of fire or explosion if the battery is replaced by
an incorrect type. Ensure to replace only with the
same type.
• Risk of fire, explosion or the leakage of flammable
liquid or gas if the battery is left in an extremely
high temperature surrounding environment
and/or subjected extremely low air pressure. The
battery pack or batteries shall not be exposed to
excessive heat such as sunshine, fire or the like.
• Risk of fire, explosion or the leakage of flammable
liquid or gas if the battery is disposed into fire
or a hot oven, recharged, shorted, mechanically
crushed or cut of the battery.
• If spilled fluid comes in contact with your eyes or
on clothing, immediately rinse with water and
consult a physician.
2
English

Battery installation

If the remote control operates only over shorter
distances or does not operate at all, it is possible
that the batteries are depleted.
In such instances, replace the both batteries with
new ones.
1
Insert two "AAA"/"R03"-size batteries
with the ¢ and ¤ poles aligned properly,
following the illustration inside the case.
Switch the operation mode
The functions operated from the remote control
differ depending on the position of the mode
switch.
SRC
MODE FNC/PBC
TOP MENU MENU DVD SETUP
AUDIO SUBTITLE ANGLE
38 7
ENTER
∞
− +
AM FM OPEN
4 ¢
AUD mode
■
1
¡
1 2 3
ABC DEF
Switch to this mode when controlling a selected
e
E
4 5 6
GHI JKL MNO
source or tuner source, etc.
7 8 9
PQRS TUV WXYZ
DVD mode
■
0
CLEAR DIRECT
Switch to this mode when playing DVDs or CDs
etc. with the player integrated in this unit.
TV mode
■
This is switched when controlling TV.
NOTE
• The position of the remote control mode switch is
indicated in the title of each mode, e.g., "(AUD mode)".
• When controlling a player that is not integrated in the
unit, select "AUD" mode.
DISP
V.SEL
RETURN
ZOOM
AUD•
DVD•
AUD•
DVD•
T V• T V•
VOL
∞
2 ZONE
u
R.VOL
d
ATT