TABLE OF CONTENTS
Safety Information ....................................................................................................................2
Package Contents ....................................................................................................................5
Hardware Contents ...............................................................................................................................6
Preparation ...............................................................................................................................6
Initial Installation .......................................................................................................................6
Installing Safety Cable ..............................................................................................................8
Wiring .......................................................................................................................................9
Final Installation ......................................................................................................................11
Operating Instructions ............................................................................................................15
Care and Maintenance ...........................................................................................................17
Troubleshooting ......................................................................................................................17
Limited Lifetime Warranty .......................................................................................................18
Replacement Parts List ...........................................................................................................18
SAFETY INFORMATION
READ AND SAVE THESE INSTRUCTIONS
• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for
repairs, it must be shipped in its original packaging to ensure proper protection against damage
that might exceed the initial cause for return.
•
Make sure all electrical connections comply with local codes, ordinances, the Canadian Electrical
Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring
handbook if you are unfamiliar with installing electrical wiring.
•
Make sure the installation site you choose allows a minimum clearance
the floor and at least 30 in. from the end of the blades to any obstruction.
•
After you install the fan, make sure all connections are secure to prevent the fan from falling.
• The net weight of this fan, including the light kit, is: 13 lbs.
When using an existing outlet box, make sure the outlet box is securely attached to the building
structure and can support the full weight of the fan. Failure to do this can result in serious injury or
death. The stability of the outlet box is essential in minimizing wobble and noise in the fan after
installation is complete.
To reduce the risk of serious bodily injury, DO
fan, including the blades.
DANGER
NOT use power tools to assemble any part of the
2
of
7 ft. from the blades to