Harbor Breeze MAYFIELD C-BTH44ABZC5L Mode D'emploi page 7

INITIAL INSTALLATION
2.
This fan can be mounted as a flushmount on a
regular (no-slope) ceiling only.
Check to make sure blades (G) will be at least
30 in. from any obstruction and at least 7 ft. above
the floor.
3.
Remove all mounting bracket nuts (S) and
mounting bracket flat washers (Q) from mounting
bracket (A).
4.
Secure mounting bracket (A) to outlet box (not
included) using screws, spring washers and flat
washers provided with the outlet box.
NOTE: It is very important you use the proper
hardware when installing the mounting bracket
(A) as this will support the fan.
2
G
7 ft.
min.
3
4
A
7
Q
S
30 in.
min.
A