Removing Or Replacing The Tip; Cleaning; Main Unit; Water Tank - Silk-n OPTIFLOSS ND -DC01 Mode D'emploi

3. Wipe the product dry with a dry cloth.
4. Gently push the water tank upwards until it is fully closed.

6.3 Removing or replacing the tip

1. Make sure the product is switched off.
2. Press and hold the tip release button
/ upwards to remove it from the connection hole
10 11
3. Release the tip release button.
For tip replacement, insert another tip into the connection
hole. You will hear a click sound when the tip is fully inserted.

7 Cleaning

WARNING! RISK OF ELECTRIC SHOCK!
• Always unplug the product from mains
power before cleaning.
NOTICE! RISK OF DAMAGE!
• Do not use any aggressive cleaners (e.g.
vinegar or limescale removers), brushes
with metal or nylon bristles, or sharp or
metallic cleaning utensils such as knives, hard
scrapers and the like.
• Do not use hot water for cleaning.

7.1 Main unit

Use a damp cloth (if necessary, with liquid soap) to wipe off the
main unit and then wipe dry with a dry cloth.

7.2 Water tank

1. Clean the inside of the water tank
Remove any dirt at the water tank cover
cloth.
2. Pour out the water from the water tank. Always keep the
water tank dry when not in use and before being stored.
and lift the tip
6
with warm water.
4
with a damp
5
EN
/ /
9
8
.
1
14