Maintenance; Maintenance Of The Rf Contact; Replacing The Brush Head; Parts & Consumables - Silk-n ToothWave H7001 Mode D'emploi

7. Maintenance

7.1 Maintenance of the RF contact

EN
Once a month, remove the brush head (#1)
from the handle (#2). Clean the groove in the
handle (#2) to remove any toothpaste or debris
that may have accumulated. Use a cotton bud,
rinse and dry with a clean dry cloth.

7.2 Replacing the brush head

Replace the brush head (#1) every 3 months,
or whenever you see that the bristles are
damaged or worn. To change the brush head
(#1), hold it straight (don't twist it), and pull it
from the handle (#2) Then replace with a new
brush head (#1).
8. Parts & consumables
You can purchase replacements from where you purchased
the device, or online. Refer to the customer service section for
details.
11