Stop & Go Function; Recall Function; Keep Warm Function; Flexzone - Novy Easy 1851 Mode D'emploi

4.3.7 Stop & Go function
This function temporarily interrupts the activity of the hob and
allows a restart with the same settings.
Turning Stop & Go on and off:
Switching on
II
Press for 2 seconds until it blinks.
Switching off
II
Press for 2 seconds.
Select a cooking zone with the zone selection
key

4.3.8 Recall function

After turning the hob off
to recall the last selected settings: (this up to a maximum of 10
seconds)
– State of all cooking zones (power)
– Minutes and seconds of the programmed cooking zones by
the timers
– "Automatic cooking" function

– Keep warm function

The recall procedure is as follows:
– Push the control key
II
– Push before the flashing stops.
The previous settings are now active again.
4.3.9 Keep warm function
This function makes it possible to automatically reach and
maintain a temperature of 42°C, 70°C or 94°C.
This prevents pans overflowing or your food sticking to the
bottom of the pans.
Switching the keep warm function on and off:
Keep warm 42°
Press once
Keep warm 70°
Press twice
Keep warm 94°
Press 3 times
Switching the keep warm function off
Glide your finger over the slider
0
or press until
The maximum duration of the keep warm function is 2 hours.
Display
I I
0‐9
, it is possible
for 2 seconds.
Display
U
U
U
0 9
to
0

4.3.10 Flexzone

This function allows you to join the 2 left and 2 right zones
so they operate as 2 large flex zones. This function can be
activated manually.
Manual activation
Simultaneously press the 2 zone selection
keys of the 2 flex zones A1, A2 or B1, B2 to be
shared.
Increase the power
Slide your finger over the left slider until you
reach the desired power level, both flex zones
display the chosen power.
Switch Flexzone function off
Simultaneously press the 2 zone selection keys
of the 2 combined zones.

4.3.11 Grill function

This special cooking function optimises heating and warming
in a cast iron pot/grill plate. This will ensure improved results of
the food you are cooking. Flex zones A1 and A2 or B1 and B2
must first be connected with the flexzone function.
Activate
Select the lower cooking zone A1 or B1 using
the zone selection key. Press
Increase the power
Glide your finger over the left slider until you
reach the desired power; both zones display
the chosen power.
Switch grill off
Select a cooking zone using the zone selection
key. Press

4.3.12 Locking the controller

To avoid a hob selection being changed, during cleaning for
example, the controller must be locked (except the on/off
button).
This function can only be activated 10 seconds after switching
the hob on.
Lock
Press the for 2 seconds.
The symbol now lights up brightly.
Unlock
Press the for 2 seconds.
The symbol now lights up normally.
– 50 –
Flexzone:
Display
Grill function:
Display
Locking:
Display
0
0‐9
0
0