General Power Tool Safety Warnings - Makita UM600D Manuel D'instruction

ENGLISH (Original instructions)
SPECIFICATIONS
UM600D with shear blade for grass shear installed
Model:
Cutting width
Strokes per minute
Dimensions
(L x W x H)
Rated voltage
Net weight
UH201D with shear blade for hedge trimmer installed
Model:
Blade length
Strokes per minute
Dimensions
(L x W x H)
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
SAFETY WARNINGS

General power tool safety warnings

WARNING:
Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
347 mm x 177 mm x 131 mm (13-5/8" x 7" x 5-1/8")
D.C. 10.8 V - 12 V max
1.3 - 1.5 kg (2.8 - 3.3 lbs)
504 mm x 120 mm x 131 mm (19-7/8" x 4-3/4" x 5-1/8")
D.C. 10.8 V - 12 V max
1.3 - 1.5 kg (2.8 - 3.3 lbs)
BL1016 / BL1021B / BL1041B
DC10SB / DC10WD / DC18RE
Do not operate power tools in explosive atmo-
2.
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
2 ENGLISH
UM600D
160 mm (6-5/16")
2,500/min
UH201D
200 mm (7-7/8")
2,500/min