Makita UM600D Manuel D'instruction page 12

2. While pressing the lock lever, turn the undercover
counterclockwise until
with on the lock lever.
3. Remove the undercover.
4. Loosen the two screws with a screwdriver and
remove the shear blades.
► 1 . Screws
NOTE: The shear blades can be removed without
removing the screws.
on the undercover is aligned
1
5. Remove the crank from the shear blades.
► 1 . Crank
NOTE: The crank may remain in the tool.
Attach the blade cover and the storage case to the
removed shear blades, and then store the blades.
Installing the shear blades
1. Prepare the crank, undercover, and new shear
blades.
1
► 1 . Crank 2. Undercover 3. Shear blades
2.
Attach the blade cover to the shear blades.
12 ENGLISH
1
2
3