Electrical; Electrical Requirements - Forno FFSGS6239-30 Manuel D'installation

Disassemble

Electrical

Your range must be electrically grounded in accordance with local codes or, in the absence of local
codes, in accordance with the National Electrical Code (ANSI/NFPA 70, latest edition). In Canada,
electrical grounding must be in accordance with the current CSA C22.1 Canadian Electrical Code
Part 1 and/or local codes.
The power supply must be the correct polarity. Reverse polarity will result in continuous sparking
of the electrodes, even after flame ignition. If there is any doubt as to whether the power supply
has the correct polarity or grounded, have it checked by a qualified electrician.

ELECTRICAL REQUIREMENTS

Electrical Supply
Service
Receptacle
Power Cord
(grounding) plug for your protection against shock hazard and should be plugged directly into a
properly grounded three-pronged receptacle.
cut or removes the grounding prong from the plug.
Label all wires prior to disconnection when servicing controls. Wiring errors can
cause improper and dangerous operation. Verify proper operation after servicing.
Lift the rack up and pull out slowly until free of the side rails.
15 amp or 20 amp dedicated circuit
this cooking range is equipped with a three-prong
Grounded, 110/120 VAC, 60 Hz
3-prong grounding-type
12
6' (1.8 m)