Installation Instructions
Door Handle Installation
The door handle is not preinstalled. Find it in the front
side of the whole package. Follow the illustrations below
to install the door handle quickly and easiliy.
Keep the square rubber mat of the handle
mount to avoid scratching the oven door until this side is
ready to be installed.
1. Remove the round black rubber mat from the inside door, and the square rubber mat on the
handle mount.
2. Insert the screwdriver to the hole, and remove the screw nut from outside.
3. Install the handle with the exposed screw.
4. Repeat for the other side as step 1 to 3.
5. Put the round black rubber mats back to cover the two holes on the inside door.
Cooktop Burner Grates Installation
Remove the packing materials from the cooktop burner
grates. Place the burner grates to the right position. Pay
attention to the middle right grates as illustrated, as the
thicker side should be in the left.
Put the griddle (only for FFSGS6239-48) and the
wok support to the burner(s) you like to cook.
Oven Racks Installation
Installation
Hang the rack to the side rails and push in slowly
11