Reverse Function - for Living 052-9336-4 Guide De L'utilisateur

10. Install bulb
· Install three A19 11W (Max) Led bulbs (not included)
(see Fig. 16).
IMPORTANT NOTE:
If you use bulbs that total over 70 W, the ceiling fan
can be damaged.
11. Extending pull chain
· Assemble decorative fob chain from hardware bag to fan and
light kit pull chain. Insert end of chain into chain coupling.
Check that the chains are secure by lightly pulling both chains in the coupling.
(see Fig. 17).
Turn fan on/off and select fan speed
· Restore power to ceiling fan and test for proper operation.
· The fan pull chain controls the fan speed settings:
First pull turns the fan on at high speed.
Second pull turns the fan on at medium speed.
Third pull turns the fan on at low speed.
Fourth pull turns the fan off.
· The light pull chain controls the status of light.
First pull turns the light on.
Second pull turns the light off.
Forward and reverse direction function
This ceiling fan is equipped with reverse switch for downward or upward air-flow.
NOTE: Do not change the direction of rotation while the fan blades are in motion.
To change direction, turn off the fan and wait for the blades to stop rotating
before setting the switch to the desired rotation direction, either forward or
reverse.
Forward function
· On this setting, the fan will turn counter-clockwise to create a cooling
aeffect. Use this function during warmer weather to circulate the hot
air away from your living space (see Fig. 18).

Reverse function

· On this setting, the fan will turn clockwise. Use this function during
cooler weather to re-circulate warm air down the living space (see Fig. 19).
Reverse
Reverse switch
Switch housing
Forward
9