Motor Assembly; Motor - for Living 052-9336-4 Guide De L'utilisateur

3. Motor Assembly

· Remove the mounting screws and washers from the
mounting bracket and the motor support bar (see Fig. 6).
· Lift motor support bar to mounting bracket. Align holes and
secure with washers and screws (see Fig. 7).
4. Motor Housing Assembly
· Remove the housing screws and washers from the mounting
bracket (see Fig. 8).
· Slide motor housing over motor assembly. Secure to the sides
of mounting bracket with housing screws (see Fig. 9).
5. Blade and blade arm
· Using the fan blade screws, attach the fan blades between
the fan blade arm with desired finished side faced-down on
the fan blade arm (see Fig. 10).
NOTE: This ceiling fan includes 5 dual-finished blades.
Depending on personal preference, choose the side
that best suits the decor or furniture of your room.
Mounting
bracket
Mounting
screw

Motor

support bar
Mounting bracket
Mounting
screw Motor
support bar
Mounting
Housing
bracket screw
Housing screw
Motor
Motor
housing
Blade
Blade
Blade screw
arm
7