Mounting Bracket; Motor Support Bar; Wiring Instructions - for Living 052-9336-4 Guide De L'utilisateur

6
Model No. 052-9336-4 052-9338-0
· Insert the "T" bar end of motor support bar
through rectangular opening on mounting
bracket for hands-free wiring and later motor
assembly (see Fig. 4).

2. Wiring Instructions

IMPORTANT: If you are not sure if the electrical outlet box and fan are grounded, contact a licensed
electrican for advice. They must be grounded for safe operation.
WARNING:
before wiring.
Your outlet box should have 3 wires. If they are not there, contact a certified electrican to help set his
part up. Match up and connect wires from the ceiling fan to the wires from your outlet box according to
the chart below.
Connect with wire connector
Ground and ground
Motor, light and live
Neutral and neutral
· Screw wire connectors (3 are provided) onto the tops of the twisted wires (see Fig. 5a).
· Fasten them with electrical tape (see Fig. 5b).
NOTE: The silver cord is only a safety support cable to prevent the fan from falling.
Secure the steel cable to the ceiling joist with the short wood screw and flat washer provided.
WARNING: Be sure no bare wire or wire strands are visible after making connection. Place green
and white connections on opposite side of box from the black and blue (if applicable) connections.
To avoid possible electrical shock, be sure electricity is turned off at the main fuse box
5a
4

Mounting bracket

Motor support bar

On fan
Ground wire (green)
Mo t or wi re (black)
Light wire (blue)
Neut ral wi re (whi t e)
5b
In outlet box
Ground wire
(typically copper or green)
Live wire
(typically black)
Neutral wire (white)