MasterCraft 068-0007-6 Guide D'utilisation page 7

2. Assemble Right Side Panel (Part
2-A)
Repeat Step 1. Place Right Side Upper
Panel (Part 2-A1) and Right Side
Bottom Panel (Part 2-A2) together, line
up screw holes, and use three Screws
G (Part 42) to connect them (Fig. B).
Note:
Before tightening screws, make sure the
corners and the touching edges of the Right Side
Panel (Part 2-A) are completely flush.
3. Install Top Panel (Part 3) to Left
Side Panel (Part 1-A) and Right
Side Panel (Part 2-A)
Attach Top Panel (Part 3) to Left Side
Panel (Part 1-A) and Right Side Panel
(Part 2-A). Make sure the front of the
unit faces downward. Line up screw
holes, and use six Screws F (Part 41)
and tighten (Fig. C).
Note:
Before tightening screws, make sure the
corners of the Top Panel (Part 3) are completely
flush.
4. Install Bottom Panel (Part 4) to
Left Side Panel (Part 1-A) and
Right Side Panel (Part 2-A)
Attach Bottom Panel (Part 4) to Left
Side Panel (Part 1-A) and Right Side
Panel (Part 2-A). Make sure the front of
the unit faces downward. Line up
screw holes, and use six Screws G
(Part 42) and tighten (Fig. D).
Note:
Before tightening screws, make sure the
corners of the Bottom Panel (Part 4) are completely flush.
Fig. B
Fig. C
BACK
FRONT
BOTTOM
Fig. D
TOP
FRONT
6