Maintenance Schedule; Preventive Maintenance; Adjusting The Clutch - Power Fist 8904120 Manuel D'utilisateur

V4.0

MAINTENANCE SCHEDULE

Component
Check extension spring
Check belt tension
Check brake adjustment
Check control cable
Check tire
Check all bolts & nuts
Check chain
Clean machine

PREVENTIVE MAINTENANCE

Turn off the engine and place the gear selection lever into neutral. Wait until the
engine is cool. Remove all debris and other materials that may have
accumulated on the wheels, engine or chassis.

ADJUSTING THE CLUTCH

A worn clutch may require moving the clutch lever
farther before the clutch engages.
1. Set the clutch lever to its original position.
2. Remove slack from the clutch lever cable by
loosening the nut (Fig. 2-2), then tighten the
cable control (Fig. 2-1).
3. Tighten the nut once the cable is tight.
ADJUST THE BRAKE
Rotate the nut (Fig. 3-1) behind the front
wheel to tighten the brake once a month.
Visit www.princessauto.com for more information
550 lb 6 cu. ft Mini Power Wheelbarrow
Daily Weekly
X
X
X
X
X
Action
Replace if damaged or
overstretched.
Replace if abraded or
overstretched.
Replace if damaged.
X Repressurize as needed. Replace if
deformed or damaged.
X Tighten as needed.
X
8904120
Fig. 2
Fig. 3
9