Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8904120
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National Standards
Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
2.
Wear gloves that provide protection based on the work materials or to
reduce the effects of tool vibration.
3.
Wear protective clothing designed for the work environment and tool.
4.
Non-skid footwear is recommended to maintain footing and balance in the
work environment.
5.
Wear steel toe footwear or steel toe caps to prevent a foot injury from
falling objects.
6.
This tool can cause hearing damage. Wear hearing protection gear with an
appropriate Noise Reduction Rating to withstand the decibel levels.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs, alcohol
or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
4.
Securely hold this tool using both hands. Using a tool with only one hand
can result in loss of control.
4
550 lb 6 cu. ft Mini Power Wheelbarrow
For technical questions call 1-800-665-8685
V4.0
Publicité
Table des Matières
