Power Fist 8904120 Manuel D'utilisateur page 13

V4.0
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Consult the engine manual for further troubleshooting steps and solutions.
Problem(s)
Machine does not
move while engine is
running.
Machine fails to
immediately stop
when clutch is
released.
Dump box lock does
not release or
requires additional
effort to release.
Machine movement
is jerky or is slower
than normal for the
gear selected.
Front wheels not
receiving the same
power as back
wheels. Drive chain
slips.
Visit www.princessauto.com for more information
550 lb 6 cu. ft Mini Power Wheelbarrow
Possible Cause(s)
1. Gear is not properly
selected.
2. Clutch fails to
engage gears.
Brake cable is loose.
Dump box lock cable
is loose.
1. The drive belt is
loose.
2. The drive belt is
damaged.
1. Chain drives are
loose.
2. Chains drives are
worn.
3. Wheel hub cogs
are worn down.
Suggested Solution(s)
1. Ensure gear lever is not in-between two
different gears.
2. Follow steps in Adjusting The Clutch in
Care & Maintenance.
1. Follow step in Adjust The Brake in Care &
Maintenance.
2. Replace brake cable if adjustment fails to
fix issue.
1. Follow steps in Dump Box Cable Tension
in Care & Maintenance.
2. Replace the cable if adjustment fails to fix
issue.
Follow the steps in Replacing the Drive Belt.
1. Inspect and adjust the tension pulley if it
out of position.
2. Replace the drive belt if needed.
Follow the steps in Adjusting The Drive
Chain.
1. Adjust the axle position.
2. Replace the drive chains.
3. Also inspect the hub cog on all four
hubs. Replace the cogs if they are worn
and rounded.
8904120
13