Telephone Operations; Photo Directory Set Up; Programming Photo Directory; Memory Dialing - Clarity P300 Guide D'utilisation

The P300 phone is designed to
help you communicate easily.
There are many convenient, easy-
to-use features.
A. Photo Directory Set Up
You can program up to nine photo-
dial memory buttons with the num-
bers you dial most frequently. As
these numbers change, it is easy to
change the photos and numbers in
the phone's memory. If you prefer,
you can write the names and/or tele-
phone numbers into the directory's
nine spaces.
1. Select the photos you wish to use.
Use the photo template as a guide
to cut your photos to fit the photo
frames.
2. Insert photos or written names
into memory button frames.
3. Place the clear plastic overlay over
your photos and insert the tabs into
the slots.
Fig. 7B – Photo directory template
12

Telephone Operations

P300
™
1
2 3
A D
B E
C F
4 5 6
G J M
H K N
I O
L
B. Programming The
Photo Directory
1. Lift the handset and press the
PROG button.
2. Enter a phone number as you
would dial it.
3. Press PROG again and then
press the corresponding memory
button to store this number. Hang
up immediately.
4. The number is now stored into
memory. The memory button in the
lower right corner of the frame can
be programmed for emergencies.
C. Memory Dialing
Pick up the handset and simply press
the photo directory button to dial
the programmed phone number.
D. Clarity Power
®
Clarity Power increases the incom-
ing voice up to 26 decibels (dB). The
graduated scale indicates the loud-
ness of the volume setting. Clarity
Power is turned on by pressing the
BOOST button as described in the
next section.
Fig. 8 – Emergency memory button
Control
TM
Bank