Battery Installation - Clarity P300 Guide D'utilisation

Fig. 5 – Phone base installation for
wall mounting
3. Using the short modular cord,
mount the phone as shown in
figure 6.
4. Set the dial mode switch to T
(tone) if you have touch tone service.
Set the switch to P (pulse) if you
have pulse rotary) dialing.
C. Battery Installation
An optional 9 volt battery may be
installed to brighten the visual ringer.
To open battery compartment, use
a pen to press down as indicated in
figure 7A.
Installation
Fig. 6 – Wall mounting installation
5. Connect the handset cord to the
telephone as shown in figure 3.
6. Lift the handset and listen for a
dial tone.
7. Your P300 phone is ready for use.
Insert 9V battery into compartment
in base of phone
Slide-out battery
compartment lid
to access battery
compartment
Battery
compartment
Press here to
open battery
compartment
Fig. 7A – Battery installation
11