Ultraflex B 501 CH/B Manuel D'installation Et D'entretien page 14

ULTRAFLEX
NOTICE
FOR B502 with lock feature versions extract the
lock housing (22) and disc (5) by unscrewing two
ST screws (4), two philips head M screws (23)
and a flathead screw (24).
NOTICE
For B502 with trim feature versions turn upside down the control
and untight the 4 ST screws (25) in order to let the trim cover
be loose. Paying attention to wires coming from switches, lift
the cover (26) and turn it in order to remove the right plastic
case (27).
NOTICE
For controls without trim feature is possible to remove the plastic case soon after the lever extraction
if lock is not present.
2 CONTROL B502:
Remove the plastic case (28) and split the two
mechanisms (29) by removing screws (30).
3 Rotate the lever to full throttle position.
page 14
of 71 -
SINGLE LEVER CONTROL B501 AND B502
Installation and maintenance manual
22
24
5
4
23
25
30
26
27
28
25 30
29