Installation Method - Carrier KJR-120X2/TFBG-E Manuel D'installation

3. Installation method

1. Wired remote controller structural dimensions
120mm
120mm
2. Remove the upper part of wired controller
• Insert a slot screwdriver
into the slots in the lower
part of the wired controller
(2 places), and remove
the upper part of the wire
controller. (Fig.3-2)
20mm
20mm
Fig 3-1
Buckling position
Straight head
screwdriver
46mm 46mm
60mm
60mm
Back cover
Fig 3-2
Front cover
4-GB