Philips Senseo Sarista HD8030 Mode D'emploi page 25

Masquer les pouces Voir aussi pour Senseo Sarista HD8030:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Light signal
'Coffee grounds
container full' light on
continuously.
'Coffee grounds
container full' light is on
continuously and activity
light flashes.
'Bean-funnel empty' light
on continuously.
'Bean-funnel empty' light
is on continuously and
activity light flashes.
Activity light flashes
quickly.
Activity light flashes
slowly.
Activity light flashes
during grinding.
CALC CLEAN light on
continuously.
CALC CLEAN light
flashes quickly.
4203_000_7242_2_DFU-Luxury_A5_v1.indd 25
Meaning
Action
Coffee grounds
Remove, empty and clean the coffee grounds
container. Make sure the coffee grounds container
container is full.
is taken out of the appliance for 3 seconds until the
bean-funnel empty light stops flashing, then place it
back. Make sure the coffeemaker remains switched on.
Coffee grounds
Insert the coffee grounds container into the
container not
coffeemaker properly.
properly placed.
Coffee grounds
Remove, empty and clean the coffee grounds
container. Make sure the coffee grounds container
container is full and
the coffeemaker
is taken out of the appliance for 3 seconds until the
bean-funnel empty light stops flashing, then place it
cannot continue
back. Make sure the coffeemaker remains switched
brewing..
on. Press the same button again of the coffee you
were brewing to continue the brewing process.
Replace bean-funnel (see chapter 'Before first use').
Bean-funnel is empty.
See chapter 'Before first use'.
Bean-funnel not
properly placed.
Not enough beans
Replace the bean-funnel and press the button of
in the bean-funnel to
the coffee you were brewing again to continue the
continue brewing.
brewing process.
Service door open.
Close the service door.
Brewing unit not
Place the brewing unit properly (see chapter
properly placed.
'Cleaning and maintenance').
Brewing unit
Clean brewing unit (see chapter 'Cleaning and
clogged up.
maintenance').
Coffeemaker is
Wait until the activity light lights up continuously.
heating up or flushing.
The activity light flashes once or twice when you
This indicates which
brew one or two cups. It flashes 1-6 times when you
cup is being brewed.
brew a jug of coffee: once for the first cup, twice for
the second cup, three times for the third cup, etc.
You have to descale
Follow the instructions in chapter 'Descaling the
the coffeemaker.
coffeemaker'.
This happens
Follow the instructions in chapter 'Descaling the
between the different
coffeemaker'. Do not interrupt the descaling
cycles of descaling.
procedure!
The coffeemaker
Restart the descaling procedure (see chapter
switched of during
'Descaling the coffeemaker').
the descaling
procedure.
EnglisH
25
1/9/13 1:37 PM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Senseo sarista hd8010

Table des Matières