Unpacking Instructions - Emerson LOFT CF765BQ01 Mode D'emploi

WARNING
Do not install or use fan if any part is damaged or
missing. Call Toll-Free:
1-800-654-3545
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product
by Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal injury
or property damage.
1.1
Open carton containing fan. Remove top half of
styrofoam unit. Remove parts and check to see that
you have received the following parts:
NOTE: If you are uncertain of part description, refer
to exploded view illustration.
HARDWARE CONTENTS
Part Description
1 Threaded Studs, #8-32 x 1-1/4"
2 Knurled Knobs, #8-32
3 Lockwashers, External Tooth #8
4 Wire Connectors
5 Clevis Pin
6 Hairpin Clip
7 #10-24 x 10mm Pan Head Screws
with Lockwashers
8 1/4-20 x 12mm Pan Head Screws
9 1/4" Blade Lockwashers
10 1/4" Flat Washers
11 Blade Balance Kit

1. Unpacking Instructions

Quantity
2
2
2
3
1
1
4
7
7
7
1
PACKAGE CONTENTS
Part Description
A Fan Motor Assembly
B Ceiling Cover
C Motor Coupler Cover
D Motor Cover
E Fan Blade Assemblies
F Hanger Bracket
G Hanger Ball / 6" Downrod Assembly
H SW46 Wall Control
NOTE: Place the parts from the loose parts bags
in a small container to keep them from being lost.
If any parts are missing, contact your local retailer
or catalog outlet for replacement before proceeding.
NOTE: Intermixing blades between fans can cause
excessive wobble. Keep blades in original sets of
three.
1.2
Remove the fan motor assembly from the protective
plastic bag. Place the fan assembly into the upper
foam pad with the top of the motor facing up.
The upper foam pad serves as a holder for the fan
during the first stages of assembly.
Please contact 1-800-654-3545 for further assistance
3
Quantity
1
1
1
1
3
1
1
1
A
B
4
C
3
2
1
0
emersonfans.com
U.L. Model No.: CF765-1
D
F
G
H
E