HP LaserJet 9000 Mode D'emploi page 23

4
5
ENWW
4 Position the new overlay over the
control panel. Align the ends of the
overlay with the holes on the control
panel and slide the overlay in.
5 Snap the overlay firmly onto the
control panel. Ensure that the
overlay is flat against the control
panel.
6 If you have an optional 3,000-sheet
stapler/stacker (or stacker), optional
Tray 4, or both, connect their power
cords to a surge protector or AC
outlet as well.
Change the control panel overlay 21