Care And Maintenance - Pattfield Ergo Tools PE-ARM 36 Li Traduction De La Notice Originale

7. Care and maintenance

•
Always keep the tool clean and dry and protect it from oil and gre-
ase.
•
Wear safety goggles to protect your eyes during cleaning.
•
Always keep the tool and the air vents clean in order to ensure
safe and correct use.
•
Check the ventilation grilles at the motor and at the On/Off switch
for dust and foreign bodies. Remove layers of dust with a soft
brush.
•
If required, use a soft damp rag to wipe the tool housing clean.
You can use a mild cleaning agent but no alcohol, petrol or other
cleaning agent.
•
Never use aggressive cleaning agents to clean plastic parts.
•
Lubricate all moving parts regularly.
•
Check all fasteners regularly. Vibrations might cause fasteners to
become loose in the course of time.
•
Worn out or damaged blades, blade mounts, and bolts should be
replaced as a set by an authorized professional in order to keep
the equipment in balance.
•
Do not clean the lawn mower with running water, particularly with
high-pressure water. Ensure that all mounting components (i.e.
screws, bolts, nuts etc.) are always tightened so that the equip-
ment can be safely operated at all times.
•
Frequently check the grass catch assembly for signs of wear.
•
Replace excessively worn or damaged parts immediately.
•
Store your lawn mower in a dry room.
•
In order to ensure that you enjoy the equipment for many years to
come, all screwed parts, as well as the wheels and axles, should
be cleaned and lubricated.
•
Keeping your lawn mower in good condition not only ensures a
long lifespan and high performance, but also enables the equip-
ment to thoroughly cut your grass with minimal effort. For best
results, clean the lawn mower with a brush or rag. Do not use any
Anl_PE_ARM_36_Li_SPK7.indb 297 Anl_PE_ARM_36_Li_SPK7.indb 297
- 297 -
GB
07.12.15 13:37 07.12.15 13:37