Cooke & Lewis BIMW20LUK Manuel D'installation page 11

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

05
[08] x 4
(Ø3 x 25mm)
Installation
All installation must be carried out by a competent person or qualified electrician. Before connecting to the mains supply ensure that 
the mains voltage corresponds to the voltage on the rating plate.
This appliance is supplied with a fitted plug suitable for use in your country. 
The cable must not be bent or compressed.
Regularly check the power cord for damage.
WARNING: This is a Class I appliance and MUST be earthed.
This appliance is supplied with a 3 core mains cable coloured as follows:
Brown = L or Live
Blue = N or Neutral
Green and Yellow = E or Earth
The replacement fuse must be rated at 13 Amps (UK only).
To avoid the risks that are always present when you use an electrical appliance it is important that this appliance is installed
correctly and that you read the safety instructions carefully to avoid misuse and hazards. Please keep this instruction booklet for
future reference and pass it on to any future owners. After unpacking the appliance please check that it is not damaged. If in doubt,
do not use the appliance but contact Customer Services.
The manufacturer declines all liability for damage caused to persons and objects due to incorrect or improper installation of the
appliance. Any permanent electrical installation must comply with the latest wiring regulations applicable to your country and for your
own safety a qualified electrician or contractor should undertake the electrical installation. 
Installation
Toute l'installation doit être effectuée par une personne compétente ou un électricien qualifié. Avant de raccorder le câble 
d'alimentation au secteur, s'assurer que la tension de secteur correspond à la tension indiquée sur la plaque signalétique.
17
[08]

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bimw20leu36636026324503663602632610

Table des Matières