Medion LIFE P62004 Mode D'emploi page 66

Assignment of the ISO socket block on the car radio
ISO block
Problems due to incorrect cable connections
In some types of vehicle the default assignment of the permanent plus and
alternating plus has been exchanged by the factory for the ISO block A in the
ISO plug. If this is the case in your vehicle, certain functions may be impaired:
stations may not be stored properly, for example.
To solve this, the red cable (switched plus) and the pink cable (permanent
plus) will need to be reversed in the ISO block. Appropriate adapters are
available from specialist retailers for this.
UK-18
BLOCK B – Speakers
1 rear right +
2 rear right -
3 front right +
4 front right -
5 front left +
6 front left -
7 rear left+
8 rear left -
BLOCK A – Electricity supply
1
2
3
4 Permanent plus
(permanent 12V supply
from main electrical
system)
5 Car antenna (also for
external amplifiers, etc.)
6
7 Switched plus (switched
12V voltage, via ignition)
8 Earth