Assembling The Mounting Frame - Medion LIFE P62004 Mode D'emploi

The ISO slot normally has two ISO sockets and one antenna socket.
If your vehicle does not have an ISO slot or the connections, the cable
sockets supplied can be used. Contact your specialist workshop, retailer
or departments in department stores. Refer also to the "Information on
the cables", page 16 chapter.

Assembling the mounting frame

Before installation remove the two
transportation safety screws in the
top radio casing (recognizable
because of their red flags) with a
Phillips screwdriver!
On delivery the mounting frame is
pulled over the car radio. First remove
the mounting frame from the casing of
the car radio.
To do so insert the two keys supplied
to the left and right between the
device and mounting frame (1) until
the keys click into place (2).
Then push the mounting frame
backwards over the device using the keys
(3).
MD 82309
UK
UK-11