Ensure that contacts that are free do not get dirty. This would affect the
proper operation of the car radio. For protection, always keep the
control panel in its case.
Clean the contacts if necessary with a clean, lint-free dry cloth.
Reset
To start up the radio use the tip of a pen or other
sharp object to press the RESET opening.
If the car radio does not work properly and this
can not be resolved by switching it off and on,
press the tip of a pen or other sharp object into
the RESET opening.
Removing the unit
Remove the control unit.
Pull the blind frame away.
Insert the left and right keys into the
relevant gaps on the sides of the
device. The two holding flaps will
be bent back and you can remove
the unit.
MD 82309
UK
UK-15