Use car radio
Push the car radio carefully into the slot until
it clicks into place.
While pushing the radio, take care to ensure
that the cables are not bent, squashed or under
tension during the process.
Control panel
Inserting the control panel
First insert the control panel with
the bottom right corner on the
pin to the bottom right of the
frame (as shown in the diagram).
You can also insert the operating
panel first with the bottom left
corner on the pin in the frame.
Then press the left (or right) side
until it clicks into place.
Flip the control panel upwards.
Check that the control panel is properly in place and secure. If the control
panel is not fitted properly, error messages appear in the display and/or
several keys will not function properly.
Removing the control panel
Press the OPEN button.
Press the control panel somewhat
to the right or left and then pull one
and then the other side away.
Anti-theft
When the panel is not attached, the LED anti-theft
protection light will flash on the unit.
Contacts
If the control panel is removed the contacts in the control panel and radio are
free.
UK-14